LINEE

-S

  • Elegant design
  • Extendable pull-out spray head
  • Top lever for easy access
  • High spout for easy filling
  • Silgranit-look colour version matching the Silgranit sinks and bowls

raw material: brass

brass

colour: white/chrome

white%2Fchrome
coffee%2Fchrome
anthracite%2Fchrome
tartufo%2Fchrome
rock+grey%2Fchrome
black%2Fchrome
volcano+grey%2Fchrome
soft+white%2Fchrome
chrome

wall mounted: No | high spout: No | high/low-pressure: High Pressure

Article number 518441

Find Dealer
Accessories
Data & Documentation
BLANCO UNIT

Our BLANCO UNIT recommendations

LINEE-S in BLANCO UNIT

Recommendation 1
SELECT II 60/2 Orga

Fitting Waste Collector

LINEE-S

Fitting Tab

Recommendation 2
Orga Shelf 60 H

Fitting Waste Collector

LINEE-S

Fitting Tab

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1120247

Art. ID: 120247

120247

1120550

Art. ID: 120550

120550

2119545

Art. ID: 119545

119545

3119546

Art. ID: 119546

119546

4119547

Art. ID: 119547

119547

5119548

Art. ID: 119548

119548

5120539

Art. ID: 120539

120539

6119549

Art. ID: 119549

119549

£34.99
7121896

Art. ID: 121896

121896

7118787

Art. ID: 118787

118787

7121894

Art. ID: 121894

121894

£35.49
8119550

Art. ID: 119550

119550

9119428

Art. ID: 119428

119428

10119674

Art. ID: 119674

119674

11119675

Art. ID: 119675

119675

12119271

Art. ID: 119271

119271

14119678

Art. ID: 119678

119678

£39.99
16119554

Art. ID: 119554

119554

17119679

Art. ID: 119679

119679

£26.49
18119680

Art. ID: 119680

119680

£31.99
19119681

Art. ID: 119681

119681

19117980

Art. ID: 117980

117980

£18.99
19116576

Art. ID: 116576

116576

20120243

Art. ID: 120243

120243

£7.49
21119682

Art. ID: 119682

119682

22125764

Art. ID: 125764

125764

22119683

Art. ID: 119683

119683

22123063

Art. ID: 123063

123063

23119556

Art. ID: 119556

119556

23119902

Art. ID: 119902

119902

23123018

Art. ID: 123018

123018

23123946

Art. ID: 123946

123946

24119555

Art. ID: 119555

119555

24119899

Art. ID: 119899

119899

24123019

Art. ID: 123019

123019

24123947

Art. ID: 123947

123947

25118840

Art. ID: 118840

118840

£7.49
26126945

Art. ID: 126945

126945

£7.49
26119557

Art. ID: 119557

119557

27120540

Art. ID: 120540

120540

£1.99
28120255

Art. ID: 120255

120255

29120541

Art. ID: 120541

120541

Hose protection tidy

Art. ID: 511920

Hose protection tidy

117600

Art. ID: 117600

117600

Tap support bracket for flexi tail taps: 60mm

Art. ID: 513383

Tap support bracket for flexi tail taps: 60mm

£21.99
117933

Art. ID: 117933

117933

120055

Art. ID: 120055

120055

117934

Art. ID: 117934

117934

£12.49
513384

Art. ID: 513384

513384

139188

Art. ID: 139188

139188

FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps