CATRIS

-S Flexo Filter

  • Better-tasting water directly out of the tap without compromising design
  • 3-in-1 mixer tap in semi-professional design for cold, warm and filtered water
  • Separate lever controls: cold and warm water and filtered water
  • Dual spray with integrated flow stop: easy switch from aerated stream to powerful rinse spray
  • Needs to be installed with BLANCO water filter system

raw material: brass

brass

colour: black matt

black+matt
PVD+steel

high spout: No | wall mounted: No | high/low-pressure: High Pressure

Article number 526707

Find Dealer
Accessories
Data & Documentation

Data sheet & Documentation

2 spray typesYes

2-handleNo

archetypeSemi-Pro

bridgeNo

filter mixer tapYes

handsprayYes

BLANCO UNIT

Our BLANCO UNIT recommendations

CATRIS-S Flexo Filter in BLANCO UNIT

Recommendation 1
Recommendation 2
ANDANO XL 6 S-IF

Fitting Sink

Orga Shelf 60 H

Fitting Waste Collector

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1123823

Art. ID: 123823

123823

£43.99
2123824

Art. ID: 123824

123824

3122415

Art. ID: 122415

122415

4121894

Art. ID: 121894

121894

£35.49
7124224

Art. ID: 124224

124224

£13.49
8124401

Art. ID: 124401

124401

9124118

Art. ID: 124118

124118

£1.49
12124166

Art. ID: 124166

124166

13123825

Art. ID: 123825

123825

£54.49
14122867

Art. ID: 122867

122867

£24.99
15118970

Art. ID: 118970

118970

£7.49
16126945

Art. ID: 126945

126945

£7.49
17402504

Art. ID: 402504

402504

£14.49
18124154

Art. ID: 124154

124154

19123936

Art. ID: 123936

123936

20123937

Art. ID: 123937

123937

21118840

Art. ID: 118840

118840

£7.49
Tap support bracket for flexi tail taps: 60mm

Art. ID: 513383

Tap support bracket for flexi tail taps: 60mm

£21.99
139188

Art. ID: 139188

139188

120055

Art. ID: 120055

120055

513384

Art. ID: 513384

513384

124428

Art. ID: 124428

124428

£15.99
FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps