BLANCOCULINA II

BLANCOCULINA-S II Mini Sensor

  • Iconic mixer tap combining exquisite design with semi-profunctionality
  • Manual or hands-free operation with ingenious dual sensor technology integrated in the hose arm and tap body for optimized kitchen workflows
  • Wave sensor on the tap body activates hands-free operation for a range of washing chores
  • Hands-free sensor on the spray arm starts automatically fast-filling with cold water of pots and jars
  • Wall plug and integrated battery backup (power outage protection)
  • Ideal in combination with wall cabinets

raw material: brass

brass

colour: PVD steel

PVD+steel

high spout: No | wall mounted: No | high/low-pressure: High Pressure

Article number 527466

Data & Documentation

Data sheet & Documentation

2 spray typesYes

2-handleNo

archetypeSemi-Pro

bridgeNo

filter mixer tapNo

flow rate at 3 bar (l/min)8.3 l

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1Lever CULINA-S II Mini /Sensor PST cpl.

Art. ID: 129039

Lever CULINA-S II Mini /Sensor PST cpl.

2Cartrid. cover ring CULINA-S II Mini PST

Art. ID: 129040

Cartrid. cover ring CULINA-S II Mini PST

3Magnet+screw+cover CULINA-S II

Art. ID: 129019

Magnet+screw+cover CULINA-S II

4Outer spring SST + clip CULINA-S II Mini

Art. ID: 129048

Outer spring SST + clip CULINA-S II Mini

5Spray head PST CULINA-S II /Mini /Sensor

Art. ID: 124784

Spray head PST CULINA-S II /Mini /Sensor

6Jet regulator HP LAMINAR HC TT

Art. ID: 129021

Jet regulator HP LAMINAR HC TT

7Base kit LATO volcano grey

Art. ID: 124380

Base kit LATO volcano grey

8Assembly set CULINA-S II Mini /Sensor

Art. ID: 129041

Assembly set CULINA-S II Mini /Sensor

9Stabilization plate ORION/PALLAS/TERA/URANUS

Art. ID: 126945

Stabilization plate ORION/PALLAS/TERA/URANUS

£7.49
10BLANCOLock I M33x1,5 ø54,0mm h 74mm LS

Art. ID: 203370

BLANCOLock I M33x1,5 ø54,0mm h 74mm LS

£9.99
11Electromagnetic box CULINA-S (Mini)Sens.

Art. ID: 124794

Electromagnetic box CULINA-S (Mini)Sens.

13Battery case CULINA-S II (Mini) Sensor

Art. ID: 124797

Battery case CULINA-S II (Mini) Sensor

14Flex.hose 70cm ST R FL EU 3/8-3/8

Art. ID: 124799

Flex.hose 70cm ST R FL EU 3/8-3/8

15Flex.hose 70cm ST B FL EU 3/8-3/8

Art. ID: 124800

Flex.hose 70cm ST B FL EU 3/8-3/8

16Filter gasket for corner valve ⅜''

Art. ID: 118840

Filter gasket for corner valve ⅜''

£7.49
FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps