FONTAS II Filter

FONTAS-S II Filter

  • Comfortable 3-in-1-mixer tap: filtered and unfiltered water out of a pull-out hose
  • Separate water circuit: cold and warm water lever on the right, filtered water lever on the left
  • Extra spout for filtered water – no mixture with mains water
  • Space-saving and practical: with the 3-in-1-tap no additional drilling is required for filtered water supply
  • Surface finishes to perfectly match sinks and bowls
  • Needs to be installed with a water filter system

raw material: brass

brass

colour: chrome

chrome
PVD+steel
satin+dark+steel
satin+platinum
black+matt

wall mounted: No | high spout: Yes | high/low-pressure: High Pressure

Article number 525198

Find Dealer
Data & Documentation

Data sheet & Documentation

2 spray typesNo

2-handleNo

archetypeL-shape

bridgeNo

filter mixer tapYes

flow rate at 3 bar (l/min)7.7 l

BLANCO UNIT

Our BLANCO UNIT recommendations

FONTAS-S II in BLANCO UNIT

Recommendation 1
ANDANO XL 6 S-IF

Fitting Sink

SELECT II Compact 60/2

Fitting Waste Collector

FONTAS-S II

Fitting Tab

Recommendation 2
CLASSIMO XL 6 S-IF

Fitting Sink

Orga Shelf 60 P

Fitting Waste Collector

FONTAS-S II

Fitting Tab

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1Spout FONTAS-S II chrome compl. SO

Art. ID: 123642

Spout FONTAS-S II chrome compl. SO

2Fitting piece spray head FONTAS-S II

Art. ID: 123643

Fitting piece spray head FONTAS-S II

3Spray head HP FONTAS-S II chrome

Art. ID: 123644

Spray head HP FONTAS-S II chrome

£57.99
4Jet regulator OT M16,5x1 TT Caché HC

Art. ID: 122867

Jet regulator OT M16,5x1 TT Caché HC

£24.99
4Jet regulator LAMINAR HP Caché M16,5x1 TT

Art. ID: 121196

Jet regulator LAMINAR HP Caché M16,5x1 TT

£24.99
5Key Caché yellow for TT

Art. ID: 118970

Key Caché yellow for TT

£7.49
6Jet regulator filter water FONTAS II

Art. ID: 122869

Jet regulator filter water FONTAS II

£22.49
7Jet regulator key for filter water FONTAS II

Art. ID: 122870

Jet regulator key for filter water FONTAS II

£12.49
8Lever filter water FONTAS /-S II chrome

Art. ID: 122871

Lever filter water FONTAS /-S II chrome

£33.99
9Valve core and locknut TRIMA/FONTAS II

Art. ID: 121643

Valve core and locknut TRIMA/FONTAS II

£26.99
10Cartridge HP 35 mm K-35A

Art. ID: 121894

Cartridge HP 35 mm K-35A

£35.49
11Locknut cartridge TRIMA/FONTAS II

Art. ID: 121644

Locknut cartridge TRIMA/FONTAS II

12Cartridge cover ring FONTAS/-S II chrome

Art. ID: 122872

Cartridge cover ring FONTAS/-S II chrome

13Short pin 30 mm for lever chrome

Art. ID: 123675

Short pin 30 mm for lever chrome

13Lever FONTAS /-S II chrome complete

Art. ID: 122873

Lever FONTAS /-S II chrome complete

£45.49
14Base ring chrome with gasket TRIMA/ FONTAS II  SO

Art. ID: 121652

Base ring chrome with gasket TRIMA/ FONTAS II SO

15Stabilization plate ORION/PALLAS/TERA/URANUS

Art. ID: 126945

Stabilization plate ORION/PALLAS/TERA/URANUS

£7.49
16Assembly set TRIMA/ELOSCOPE-F

Art. ID: 121653

Assembly set TRIMA/ELOSCOPE-F

£22.99
17Shower hose FONTAS-S II

Art. ID: 123645

Shower hose FONTAS-S II

18Weight for shower hose (390 gr)

Art. ID: 123646

Weight for shower hose (390 gr)

19Shower hose adapter FONTAS-S II

Art. ID: 123714

Shower hose adapter FONTAS-S II

£14.99
20Flex.hose 472mm ST N FL EU ⅜-M8x1

Art. ID: 123647

Flex.hose 472mm ST N FL EU ⅜-M8x1

21Flex. hose 50cm filter water ⅜-M8x1

Art. ID: 121654

Flex. hose 50cm filter water ⅜-M8x1

22Flex. hose 50cm ST R FI EU ⅜-M8x1

Art. ID: 123648

Flex. hose 50cm ST R FI EU ⅜-M8x1

23Flex. hose 50cm ST B FI EU ⅜-M8x1

Art. ID: 123649

Flex. hose 50cm ST B FI EU ⅜-M8x1

£21.99
24Filter gasket for corner valve ⅜''

Art. ID: 118840

Filter gasket for corner valve ⅜''

£7.49
Grease for mixer tap 25g Berulub Sihaf 2

Art. ID: 117933

Grease for mixer tap 25g Berulub Sihaf 2

Grease for mixer tap 5g Berulub Sihaf 2

Art. ID: 117934

Grease for mixer tap 5g Berulub Sihaf 2

£12.49
Special tool for locknut cartridge TRIMA

Art. ID: 121967

Special tool for locknut cartridge TRIMA

Allen key (key size 2.5 mm)

Art. ID: 139188

Allen key (key size 2.5 mm)

Additional mixer taps stabilisation 60mm

Art. ID: 513383

Additional mixer taps stabilisation 60mm

£21.99
Additional mixer taps stabilisation 75mm

Art. ID: 513384

Additional mixer taps stabilisation 75mm

Flexible sealing tape

Art. ID: 120055

Flexible sealing tape

Spray hose guide for kitchen mixer taps

Art. ID: 511920

Spray hose guide for kitchen mixer taps

£16.99
FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps