CARENA

CARENA-S Vario

  • Modern premium mixer tap
  • Covered pull-out dual-spray hose with change-over function
  • High arched outlet for easy filling of pots and vases
  • High positioned, ergonomic control lever
  • Bi-Color - the perfect colour match for SILGRANIT sink units and bowls

raw material: brass

brass

colour: white/chrome

chrome
anthracite%2Fchrome
rock+grey%2Fchrome
white%2Fchrome
tartufo%2Fchrome
coffee%2Fchrome
black%2Fchrome
volcano+grey%2Fchrome
soft+white%2Fchrome

wall mounted: No | high spout: Yes | high/low-pressure: High Pressure

Article number 521368

Data & Documentation

Data sheet & Documentation

2 spray typesYes

2-handleNo

archetypeC-shape

bridgeNo

filter mixer tapNo

flow rate at 3 bar (l/min)9 l

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1Lever CARENA / JURENA chrome complete AV

Art. ID: 121665

Lever CARENA / JURENA chrome complete AV

£57.49
1Lever CARENA /-S / JURENA chrome

Art. ID: 122740

Lever CARENA /-S / JURENA chrome

2Screw lever M5x4

Art. ID: 120540

Screw lever M5x4

£1.99
3Cover plug Ø6 chrome

Art. ID: 119219

Cover plug Ø6 chrome

£1.99
4Cover ring CARENA/JURENA chrome

Art. ID: 121666

Cover ring CARENA/JURENA chrome

5Locknut cartdrige CARENA/JURENA

Art. ID: 121667

Locknut cartdrige CARENA/JURENA

6Cartridge HP 35 mm K-35A

Art. ID: 121894

Cartridge HP 35 mm K-35A

£35.49
6Cartridge HP 35 mm (replaced by 121894 or 121896) KI

Art. ID: 118787

Cartridge HP 35 mm (replaced by 121894 or 121896) KI

7Cover cap for spout CARENA/JURENA

Art. ID: 121668

Cover cap for spout CARENA/JURENA

8Spout CARENA-S Vario chrome AV

Art. ID: 122187

Spout CARENA-S Vario chrome AV

9Set of seals for spout

Art. ID: 121675

Set of seals for spout

£2.99
10Spray head and shower hose CARENA-S Vario

Art. ID: 122188

Spray head and shower hose CARENA-S Vario

£146.49
11Set regulator HP complete and aerator key

Art. ID: 122189

Set regulator HP complete and aerator key

£20.49
12Base ring and seal CARENA/JURENA/RODALIS

Art. ID: 121671

Base ring and seal CARENA/JURENA/RODALIS

£31.49
13Assembly set CARENA-S/JURENA-S

Art. ID: 121678

Assembly set CARENA-S/JURENA-S

£30.50
14Stabilization plate ORION/PALLAS/TERA/URANUS

Art. ID: 126945

Stabilization plate ORION/PALLAS/TERA/URANUS

£7.49
16Weight for shower hose (420 gr)

Art. ID: 123888

Weight for shower hose (420 gr)

16Weight (380 g) Ø10 AV (replaced by 123888)

Art. ID: 123867

Weight (380 g) Ø10 AV (replaced by 123888)

17Flexible hose red with filter gasket 50 cm metal M8x1 AV (replaced by 122473)

Art. ID: 121672

Flexible hose red with filter gasket 50 cm metal M8x1 AV (replaced by 122473)

17Flex.hose 50cm ST R FI EU ⅜-M8x1

Art. ID: 122473

Flex.hose 50cm ST R FI EU ⅜-M8x1

17Flex.hose 50cm ST R FI EU ⅜-M8x1

Art. ID: 123934

Flex.hose 50cm ST R FI EU ⅜-M8x1

18Flexible hose blue with filter gasket 50 cm metal M8x1 AV (replaced by 122472)

Art. ID: 121673

Flexible hose blue with filter gasket 50 cm metal M8x1 AV (replaced by 122472)

18Flex.hose 50cm ST B FI EU ⅜-M8x1

Art. ID: 122472

Flex.hose 50cm ST B FI EU ⅜-M8x1

18Flex.hose 50cm ST B FI EU ⅜-M8x1

Art. ID: 123935

Flex.hose 50cm ST B FI EU ⅜-M8x1

19Filter gasket for corner valve ⅜''

Art. ID: 118840

Filter gasket for corner valve ⅜''

£7.49
20Screw for spout M4x7

Art. ID: 122751

Screw for spout M4x7

£1.99
21Jet regulator key VICUS Single

Art. ID: 123578

Jet regulator key VICUS Single

£6.49
Grease for mixer tap 5g Berulub Sihaf 2

Art. ID: 117934

Grease for mixer tap 5g Berulub Sihaf 2

£12.49
Grease for mixer tap 25g Berulub Sihaf 2

Art. ID: 117933

Grease for mixer tap 25g Berulub Sihaf 2

Additional mixer taps stabilisation 60mm

Art. ID: 513383

Additional mixer taps stabilisation 60mm

£21.99
Flexible sealing tape

Art. ID: 120055

Flexible sealing tape

Additional mixer taps stabilisation 75mm

Art. ID: 513384

Additional mixer taps stabilisation 75mm

Spray hose guide for kitchen mixer taps

Art. ID: 511920

Spray hose guide for kitchen mixer taps

£16.99
Cartridge span.SW27 CARENA/JURENA/URBENA

Art. ID: 122728

Cartridge span.SW27 CARENA/JURENA/URBENA

FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps