KANO

-S

  • Single lever monobloc mixer tap
  • Pull-out spray hose for added reach and convenience
  • Especially suitable for compact sinks

raw material: brass

brass

colour: chrome

chrome
black+matt

wall mounted: No | high spout: No | high/low-pressure: High Pressure

Article number 521503

Find Dealer
Accessories
Data & Documentation

Data sheet & Documentation

2 spray typesNo

2-handleNo

archetypehead control

bridgeNo

filter mixer tapNo

flow rate at 3 bar (l/min)11.3 l

BLANCO UNIT

Our BLANCO UNIT recommendations

KANO-S in BLANCO UNIT

Recommendation 1
LIVIT II 6 S

Fitting Sink

SELECT II Compact 60/2

Fitting Waste Collector

KANO-S

Fitting Tab

Recommendation 2
SUPRA 500-IF/A

Fitting Sink

BOTTON Pro 60

Fitting Waste Collector

KANO-S

Fitting Tab

Care Products
Spare parts

Spare parts

Spare parts
ImageArticle numbers & descriptionsPrice
1124430

Art. ID: 124430

124430

£12.99
2124431

Art. ID: 124431

124431

£2.49
3124432

Art. ID: 124432

124432

£2.49
4121896

Art. ID: 121896

121896

4121894

Art. ID: 121894

121894

£35.49
5124435

Art. ID: 124435

124435

£2.49
6124436

Art. ID: 124436

124436

£2.49
7121044

Art. ID: 121044

121044

£23.99
8116488

Art. ID: 116488

116488

£13.49
9122490

Art. ID: 122490

122490

£41.49
10122491

Art. ID: 122491

122491

11126945

Art. ID: 126945

126945

£7.49
12122694

Art. ID: 122694

122694

13122473

Art. ID: 122473

122473

13123934

Art. ID: 123934

123934

14122472

Art. ID: 122472

122472

14123935

Art. ID: 123935

123935

15118840

Art. ID: 118840

118840

£7.49
513384

Art. ID: 513384

513384

120055

Art. ID: 120055

120055

Tap support bracket for flexi tail taps: 60mm

Art. ID: 513383

Tap support bracket for flexi tail taps: 60mm

£21.99
121865

Art. ID: 121865

121865

FAQ

Frequently Asked Questions

  • Generally speaking, our mixer taps are easy-care and hygienic. This is thanks to their smooth surface, which allows hardly any dirt to settle on it. However, mixer taps do benefit from regularly cleaning. It doesn’t take much effort, but it needs to be done frequently. Take a mild cleaning agent and go over the mixer taps a few times with the soft side of a sponge. Now rub them dry with a microfibre cloth, and you’ll see that your mixer taps are back to being a stand-out feature of your kitchen once again, in just a few simple steps.

  • If your low-pressure mixer tap is dripping slightly, there’s no need to get a plumber in right away. This is completely normal. The reason is that low-pressure mixer taps are normally connected to a boiler. If you have used some warm water, cold water will flow into the boiler to be heated up. The rise in temperature means that the water in the pipe expands. As a result, the rising water pressure causes a small amount of water to be pushed into the mixer tap, where a few drops will escape.

  • Most people will need a high-pressure mixer tap in their home. This is always the case if the water is heated by the central water supply. You can tell whether applies to you if your kitchen has a wall valve for both cold and warm water pipes. You will therefore need a mixer tap that can handle the high water pressure from the pipes. Sometimes, however, your flat or house many not have a central hot water supply. In this case, the water will be heated by a boiler or flow heater. If your home has a flow heater for warm water, you will also need a high pressure mixer tap. A low-pressure mixer tap is required if your warm water is supplied via a boiler. This minimises the pressure from the water pipe and conducts the water at a much lower pressure into the boiler.

  • Our pull-out sprays make your everyday life a little easier. They allow you to get the water to the part of the sink where it is actually needed. Flexible and effective. As such, our hoses are designed for constant movement. Just make sure that the hose does not develop any kinks. This can damage it, causing it to start dripping. If the hose is no longer gliding smoothly back into the body of the tap, this doesn’t mean that you’ve done something wrong. Simply apply a little mixer tap lubricant as soon as the first signs start to show. That should do the trick. The hose will then glide back into place quickly and directly, just as it did before.

  • Imagine standing in the sunshine at the kitchen window and calmly doing the washing up. Our mixer taps make this possible. Just take a look at our detachable, lowerable or collapsible mixer taps. These three concepts allow you to open the window on the other side of your sink easily and in only a few steps.

  • A spraying mixer tap gets water everywhere, not just in the sink bowl. This is usually caused by limescale that has accumulated in the mixer tap. Instead of reaching straight for an aggressive cleaning agent, adding a little citric acid or vinegar to your cleaning water should solve the problem. To clean it, wipe the fine mesh attached to the tap outlet clean. Go over it again with a soft microfibre cloth. The trick to preventing a spraying mixer tap is to clean it regularly, so limescale doesn’t get the chance to build up.

  • Splish, splash: a dripping tap is very annoying. However, there’s no need for agitation. This is either due to limescale deposits in the mixer tap cartridge, or the seals are no longer fit for purpose. Unless you’re very adept at DIY and have a well-equipped toolbox, it’s best to call a sanitary specialist to deal with this. If you’re up to handling it yourself, clean any calcified areas of the seals or mixer tap with citric acid or vinegar. If the seal has become porous it should be replaced using the right tool. Once that’s done, everything in your kitchen will be back in order again.

other Taps

other Taps